א.מ.טכנולוגיות תעשיתיות אי.טי.אל. בע"מ

IQC Logoמאושר ע"י המכון לבקרה ואיכות

משאבות לחץ גבוהה | משאבות מינון | משאבות לתעשייה

א.מ.טכנולוגיות תעשיתיות אי.טי.אל. בע"מ

רח' המסגר 10, חיפה, 2629018

Split Case Pumps ( HS ) - Single Stage
Split Case Pumps (HS) - Single Stage \ משאבות צנטריפוגליות שלב בודד
Type
Single Stage Axially Split Case Pumps with double entry impeller
Size Range
50mm(2") to 400mm(16") discharge nominal bore
Capacity
up to 3000 m3/hr
Head
up to 200 m
Speed
up to 3000 rpm
Construction
Single / double volute depending on head. Soft packed / mechanical seal fitted options. Horizontal / vertical shaft. CW / CCW rotation. ANSI / PN/ other Flange options.
Split Case Pumps ( HST ) - Two Stage
Split Case Pumps (HST) - Two Stage \ משאבות צנטריפוגליות - דו שלבים
Type
Two Stage Axially Split Case Pumps with two single or two double entry impellers
Size Range
65mm(2.5") to 250mm(10") discharge nominal bore
Capacity
up to 1200 m3/hr
Head
up to 360 m
Speed
up to 3000 rpm
Construction
CW /CCW rotation. Internal /external cross-over depending on size. Horizontal / vertical shaft. Soft packed / mechanical seal fitted options. ANSI / PN/ other Flange options.
Compact Split Case Pumps (CSC)
Compact Split Case Pumps (CSC) \ משאבות צנטריפוגליות קומפקטי
Type
Single Stage Comapact Mechanical Seal fitted pumps for air conditioning, water supply and industrial cooling water services
Size Range
50mm(2") to 250mm(10") discharge nominal bore
Capacity
up to 1200 m3/hr
Head
up to 90 m
Speed
up to 3000 rpm
Construction
Standard , High pressure and vertical shaft versions. Double volute design for sizes 100mm (4") and above.
NFPA Fire Pumps (HF & EF)
NFPA Fire Pumps (HF & EF) \ משאבות כיבוי אש
Type
Split case Single / Two Stage & End Suction
Size Range
50mm(2")to 400mm (16") discharge nominal bore
Capacity
up to 7500 gpm (1700m3/hr)
Head
up to 450psi (320m)
Speed
up to 3600 rpm
Construction
Single / double volute pumps depending on pressure ratings. Two stage pumps with either two single entry or two double entry impellers for 15ft suction lift capability. Vertical shaft split case pumps for FPSO & other off-shore duties.
Ship's Fire Pumps (FIFI Pumps)
Ship's Fire Pumps (FIFI Pumps) \ משאבות כיבוי אש ימית
Type
Split Case & End Suction
Size Range
100mm(4") to 450mm(18") discharge nominal bore
Capacity
up to 3600m3/hr (1000 lps)
Head
up to 200m
Speed
up to 2300rpm
Construction
Compact space optimised design. Many branch orientation options. CW / CCW rotation.
Sewage Pumps (SW)
Sewage Pumps (SW) \ משאבות ביוב
Type
Non Clog Sewage pumps 2 /3 vane design
Size Range
100mm(4") to 600mm(24") discharge nominal bore
Capacity
up to 3000 m3/hr
Head
up to 100 m
Speed
up to 1500 rpm
Construction
Horizontal, vertical direct mounted, and vertical cardon shaft driven
ISO 2858 End Suction Pumps (ES)
ISO 2858 End Suction Pumps (ES) \ משאבות יניקה
Type
Single Stage End Suction Back Pull-out Pumps. Dimensional conformance - ISO2858. Performance conformances - ISO5199
Size Range
32mm to 200mm discharge nominal bore
Capacity
up to 1000 m3/hr
Head
up to 140 m
Speed
up to 3000 rpm
Construction
Standard / high working pressure versions. Packed gland / mechanical seal fitted strenghtened bearing options. 500mm nominal diameter pumps for high head applications. Centre line mounting options.
Large End Suction Pumps ( ESL)
Large End Suction Pumps (ESL) \ משאבות יניקה גדולות
Type
Single Stage End Suction Back Pull-out Pumps
Size Range
200mm(8") to 450mm(18") discharge nominal bore
Capacity
up to 3000 m3/hr
Head
up to 180 m
Speed
up to 2300 rpm
Construction
Single / double volute depending on head range. Packed gland / mechanical seal version. Many bearings and bearing lubrication options. CW / CCW rotation. Special suction branch orientation options.
Mixed Flow Pump (EMF)
Mixed Flow Pump (EMF) \ משאבות ביוב הגנת סתימות
Type
Non Clog Sewage pumps 2 /3 vane design
Size Range
100mm(4") to 600mm(24") discharge nominal bore
Capacity
up to 3000 m3/hr
Head
up to 100 m
Speed
up to 1500 rpm
Construction
Horizontal, vertical direct mounted, and vertical cardon shaft driven.

Special Pumps

Vertical End Suction ESV & ESLV Range

Vertical End Suction ESV & ESLV Range

Key Features:

  • Pumpsense ESV / ESLV Vertical centrifugal pumps employ single entry impellers and conform to production classification OH3A of Hydraulic Institute Standards.
  • ESV / ESLV pumps offer compact space-saving advantages compared to horizontal pumps. Drive motor can be mounted on the motor stool and coupled flexibly to the pump. Alternatively, pumps can be driven through a Cardan shaft with a motor mounted on a separate floor. These features protect the motor where the pump pit is prone to flooding.
  • Pump hydraulic designs are verified by numerical testing using CFD analysis.
  • Every pump is tested vertically using either shaft motor or actual drivers. In addition, every pump is supplied with a full set of QA documents relating to materials, dimensional accuracy, pressure integrity, and impeller balancing.
  • ESV / ESLV pumps are offered with many materials, mechanical seals, and mounting options. Pumps are often engineered to meet customers’ specific requirements in terms of construction and dimensional features and performance requirements.
 

Major applications included:

Irrigation | Chilled water application | Heating & air conditioning | Cooling tower application | Booster application

VSP Range Vertical Single Stage Sump Pump

VSP Range Vertical Single Stage Sump Pump

The vertical extended shaft single stage centrifugal pump have an important place within the pumping industry. It performs as no other pump can, the function of transferring Liquid from below ground reservoirs or enclosed tanks. While the vertical pump is not necessarily expensive, its design is in many ways more critical than those of more common centrifugal pumping units. Attention must be paid to pump operating speeds, bearing arrangements, shaft design and construction.

Overview

The VSP Range, available in 37 different sizes, is a sump pump with a shrouded, semi-open, open and non-clog type impeller designed for clean water, process water, solid handling, sewage water application etc.

These Pumps are heavy duty modular design maximizing flexibility to suit customer specification. Design are in compliance with the Applicable Standard ISO 13709/API 610 (VS4). Advance computer techniques including 3D modelling, FEA and CFD.

Optional Features:

  • Long Shaft Single Stage End Suction Centrifugal Pumps
  • Shrouded or Semi Open Impeller Design
  • Design available Up to 6 meter (20 ft) of Sump Depth
  • High Strength Steel used as Shaft, based on the pit depth design can accommodate the intermediate shaft as required.
  • Strong & Rigid Support bearing of variety of MOC is available (SAE 660/ Cutless Rubber/ Thordon – Non-matelic Bush etc)
  • Lubrication option using product or external flushing (Grease Lubrication as Optional)
  • Level Controls (Level measuring instruments and float switch): A float switch, rod and float are typically used in sump pump applications. This is a common option where liquid levels vary, requiring starting and stopping of the pump
  • Heavy – duty Match Pair Back to Back Angular contact Ball Bearing (Thrust Bearing)
  • ATEX Compliance, on application
  • A wide Range of Alloys Available on Request including NACE certification
  • Sole Plate can be customized based on the tank/ pit opening – Both Circular and Rectangular Opening is available.
  • Shaft Sealing option is available both Gland Packed and Mechanical Seal
  • Bearing Isolator is used to protect the thrust bearing
Pumpsense

Request Call Back

דילוג לתוכן