A.M. Industrial Technologies ITL

Machine Tools – Offline Central Coolant Recycling System

  • Heavy Stinking Emulsions odors?
  • Hard to Breath?
  • Diseases?
  • Again, need to add, replace and dispose coolants?


No More. Our solutions are designed to prevent and help to improve situation. We at ITL seriously considering your coolants treatment in order to save your costs and keep your environment right.

Coolant Filtration Machine Tools , Offline Central Coolant Recycling System

Systems are an outcome of years of experience and R&D in Industrial Filtration.

Small footprint units can be used as Local /Central Stationary or mobile Skid Mounted Recycling system. When application is std. machining, Solutions suggested are the ABWD -Auto Back Wash Drum Recycling series.

When sludge and fines are involved (grinding, composite materials.) HMR -Hydrostatic Media Recycling series are suggested.

Coolant Filtration Machine Tools , Offline Central Coolant Recycling System


The Offline Central Coolants Recycling Conception:

System is installed near the Machines or away in the Swarf room ( distance is not an obstacle). Coolants are continuously extracted (by 2 main extraction pumps , one working , one St. by located at the piping end near the filter) from Machines one/few MC at a time (via a friendly programable HMI), filtered of solids, free of tramp oils , Ozone treated against bacteria’s and return to same MC/MC’s tanks to maintain the right coolant level. As Process is an “Of Line “process, MC’s productivity is not affected.

Coolant Filtration Machine Tools , Offline Central Coolant Recycling System

On the filter, an auto Top Up device connected to the factory RO and Emulsion preparation system maintain the right emulsion concentration.

The Coolants Piping can be over head or in floor depend on the workshop Lay-Outs and restrictions. 

At the MC’s existing tanks, we install a Hi/Low level sensor and 2 auto valves. One on the used coolant extraction line and second on the clean return line.

The shape, dimensions and appearance of piping vary from one application to another.

As the unit is an Off-Line system, flow rate and coolant tank capacity is not an issue. The main idea is to periodically treat each MC by replacing used coolant, fill with clean recycled one, filter the coolant inclusive piping flushing to prevent solids to settle and go to next MC. One after another. So, during the day all machines sumps are recycled several times.

Depend on the application systems modules consist of:

Modular Auto Back Wash Drum Filter modules.
• Auto Back Wash unit utilizing clean effluent to remove fines from the filter.
• 25-40-micron levels of filtration.
• Debris are discharged into a through away or washable bag filter.
• Main and secondary Tramp Oil Separation to assure 98-100% oil removal.
• Anti-Bacterial treatment with Ozone.
• Full Control on MC’s sumps.
• Friendly HMI with parametric set up to fit applications.
• Maintenance Free system.


2.0.HMR Module for sludge removal consist of:

• Hydrostatic Media Filter modules.
• 10-30-micron levels of filtration.
• Fines are removed with the media and disposed in an integral bin.
• Media Sensor to notify periodically media replacement.
• Main and secondary Tramp Oil Separation to assure 98-100% oil removal.
• Anti-Bacterial treatment with Ozone.
• Full Control on MC’s sumps.
• Friendly HMI with parametric set up to fit applications.
• Minimal Maintenance ( only media replacement from time to time).

Coolant Filtration Machine Tools , Offline Central Coolant Recycling System


Benefits:

  • System been designed to filter various water base- coolants, Industrial Waste 
    water etc.
  • System is a cost-effective solution to service small and medium workshops.
  • Various level of filtration between 10– 40 microns.
  • Various flow rates to handle large or small sumps.
  • Constant MC’s sumps Level & Concentration. Operator is free to work. No necessity to look after anymore.
  • Media & Media Free system.
  • Minimal Maintenance.
  • Finish: RAL colors painted or Stainless-steel fabrication.
  • ITL supply Fully Tailored Solution inclusive piping design and installation to fit 
    plant lay-outs and restrictions.
  • ITL Design, Manufacture and Supply solutions for: Coolant Filtrations: Machine tools, Grinding, Wire cut, Honing, Process Industry.
  • High Pressure System: Machine tools , Membrane filtration industry, Others.
  • Recycling of liquids and solids.
  • Our system can be local, Central or Mobile Std. or Tailor Made. 
  • Our System service HNK, Okuma, Maho Dekel, Mori Seiki, Makino, Mazak, Doosan ,Hass Blohm, Rolomatic, Bridgeport ,Michael Dekel and more.
Coolant Filtration Machine Tools , Offline Central Coolant Recycling System
Coolant Filtration Machine Tools , Offline Central Coolant Recycling System

We supply Peripheral solutions such as Pumps, Chip Conveyors, Air Filtration, Chillers, Sump Cleaners , Washing and Degreasing systems ,Spares & Disposables.

Skip to content