English 
עִבְרִית 
PERFORMANCE SUMMARY
| Max Discharge Pressure : | |
| Up to 83 Bar @ 1050 rpm (for metallic pump heads) | |
| Max Inlet Pressure : | |
Up to 34 Bar with 83 Bar Discharge | |
| RPM Range: | 5 rpm to 1050 rpm |
| Flow Range: | 1.2 L/min to 138 L/min |
AVAILABLE OPTIONS
- API 674
- ATEX
- Electronic Flow Rate Control for Safe Zone Installations
- Oil Cooler for Hot Duties
Hydraulic End:
- Cast Aluminium (Standard)
- Ductile Iron
G35
LIQUID HEAD MATERIALS
Brass
Cast Iron (Nickel-Plated)
Duplex Alloy 2205 Stainless Steel
316L Stainless Steel – Threaded or SAE Ports
316L Stainless Steel – ANSI RF Flanges 150x600lb
316L Stainless Steel – ANSI RF Flanges 600x1500lb
316L Stainless Steel – Tri-Clamp Flanges
Polypropylene
Hastelloy CW12MW
DIAPHRAGM MATERIALS
Aflas
EPDM
FKM
PTFE
FFKM
Neoprene
Buna-N
VALVE MATERIALS
Ceramic
Hastelloy C
Nitronic 50
Tungsten Carbide
17-4 Stainless Steel
CONNECTION PORTS
Threaded | |
| Inlet | 2-1/2″ BSPT |
Discharge | 1-1/4″ BSPT |
SAE Flanges | |
| Inlet | 3″ |
Discharge | 1-1/4″ |
ANSI (RF) | |
| Inlet | 150lb RF |
| Discharge | 600lb RF |
| or | |
| Inlet | 600lb RF |
Discharge | 1500lb RF |
Tri-Clamp – Max. 80bar | |
| Inlet | 3″ |
| Discharge | 1-1/2″ |
Note:
Tri-Clamp Flanges polished to 0.8 or 0.4 Ra
(Includes polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers, along with TSE, Passivation, Surface Finish & Weld Procedure Certificates).
